Car service lifts, as the name implies, are mechanical equipment for lifting cars. Car service lifts are widely used, mainly in the following two fields:
1. Car maintenance.
Car repair shops and 4S shops usually use car service lifts as lifting equipment to lift cars for car maintenance, car repair, tire positioning and other work, which is convenient for car maintenance.
2. Stereo garages.
Car service lifts can also be used in parking lots. As a stereo garage, it is convenient for everyone to store and retrieve cars. There is no need to reverse when parking. Just drive the car onto the platform of the car service lift, and then store and retrieve the car according to the prompts. It is not only convenient and fast, but also can create a stereo garage and make full use of the garage space.
The use of the car service lift is very simple. Drive the car to the platform of the lift, then get off the car, turn on the power to operate, stop when the car is lifted to the appropriate height, and press the locking device. However, the key to operating the car service lift is to pay attention to safe operation and understand the operating procedures of the car service lift:
1. The load of the car service lift is limited. Overloading or partial loading should be prohibited during use to avoid danger.
2. The placement of cars on the car service lift and the operation of the lift must be operated by trained and qualified professionals.
3. When lifting a car, no one should be in the car. During lifting and operation, any unrelated personnel should stay away from the lift.
4. Before the car is driven onto the lift, the passage should be cleared, and the lifting arm, connector, axle support, etc. should not be driven over or hit to prevent damage to the car service lift or the car.
5. You should develop the habit of checking the equipment every day, and find problems in time to avoid problems such as loose screws and different tightness of the wire rope on both sides, which will cause a sharp change in the center of gravity, thereby causing instability when lifting the car.
6. Before lowering the lift, all obstacles under the vehicle should be removed. No one should stand under the vehicle. Before lowering, the locking device should be released and the vehicle should be lowered safely.
